Ford 2010 Milan Hybrid страница 109 Скачать руководство пользователя

Страница: 109 / 326

WARNING:

To minimize the risk of neck injury in the event of a

crash, head restraints must be installed properly.

Using the manual lumbar support (if equipped)

The lumbar control is located on the
side of the seat cushion.

Turn to adjust lumbar support.

Adjusting the front manual seat (if equipped)

WARNING:

Never adjust the driver’s seat or seatback when the

vehicle is moving.

WARNING:

Always drive and ride with your seatback upright

and the lap belt snug and low across the hips.

Lift handle to move seat forward or
backward.

2010 Milan

(mln)

Owners Guide, 1st Printing
USA

(fus)

Seating and Safety Restraints

109

Содержание 2010 Milan Hybrid







































































































































































































































































































































Результаты поиска

Содержание 2010 Milan Hybrid

Отзывы:

Похожие инструкции для 2010 Milan Hybrid

Бренды по названию

Популярные бренды

Ford 2010 Milan Hybrid, Руководство пользователя

Результаты поиска

Содержание 2010 Milan Hybrid

Отзывы:

Похожие инструкции для 2010 Milan Hybrid

Бренды по названию

Популярные бренды