ForaCare POCT S10a, Инструкция по эксплуатации

Страница: 20 / 48

20
Patient Test
This section explains how to perform a measurement on patients
by ForaCare POCT S10 Blood Glucose Monitoring System.
The followings are precautions we strongly recommended to
ensure operators have the most reliable and accurate test results.
Always wear gloves and follow your facility’s biohazard control
policy and procedures when performing tests involving patient
blood samples.
Use a new pair of gloves when performing a patient test.
Change gloves between patients.
Wear protective glasses and/or other protective clothing if
necessary.
Use control solutions approved for ForaCare POCT S10 Blood
Glucose test strips use only to ensure the performance of Fora-
Care POCT S10 Blood Glucose test strips and meter.
Test strips should be used before their expiration date.
Do not use wet, bent, scratched, or damaged test strips.
After the blood is applied to the test strip and the count down
begins, do not remove the test strip.
Use a new test strip for a new test.
Read instructions before using test strips. Please refer to the
strip manual included in the kit.
Only an auto-disabling, single use lancing device should be used.
Please refer to the following practice guidelines for more informa-
tion about the correct procedure:
Biosafety in Microbiological and Biomedical Laboratories (BMBL)
found at http://www.cdc.gov/biosafety/publications/bmbl5/
“Protection of Laboratory Workers From Occupationally Acquired
Infections; Approved Guideline-Third Edition” Clinical and Labora-
tory Standards Institute (CLSI) M29-A3.