ForaCare POCT S10a, Инструкция по эксплуатации

Страница: 10 / 48

10
The test strip consists of the following parts:
Absorbent Hole
Apply a drop of blood here and the blood will be
sucked up automatically. The minimum required
blood volume is 0.7 microliter.
Confirmation Window
This is where you confirm if enough blood has
been applied to the absorbent hole of the strip.
Test Strip Handle
Hold this part to insert the test strip into the slot.
Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it will go no further.
Test Strip
Your system measures the amount of sugar (glucose) in whole
blood. Blood is applied to the absorbent hole of the test strip and
is automatically drawn into the reaction cell where the reaction
takes place.