ForaCare POCT S10a, Инструкция по эксплуатации

Страница: 11 / 48

11
Battery Setup & Recharge
This meter uses one Li-ion rechargeable battery. Please follow
the instructions below to setup the meter.
1) Press and push the battery cover on the back of the meter
outward, and then remove the cover.
2) Read the instructions on the battery first. Then put in the battery
and push it to the right side of the compartment and insert the
battery appropriately.
3) To take out the battery, please press the clicker on the left side
of the compartment. The battery will be automatically ejected
and can be easily removed.
When the battery is low, a battery symbol will display on the
screen, which means it is about time to recharge the battery.
For example,
To recharge the battery, please connect the USB cable to the
USB port of the meter and to the computer. The recharge indica-
tor will light up in red when the battery is recharging. When the
battery is fully recharged, the indicator will turn green.
If using AC/DC power adapter to recharge the meter, please con-
nect the USB cable to an electrical outlet and the meter. After the
battery is fully recharged, the recharge indicator will be green.
BEFORE USE
2008/06/20
Setup Mode
QC Mode
Measure Mode
12:59 AM
1/4 1/5
Note
One fully charged battery is expected to last for approximately
2000 measurements.