background image

IMPORTANT SAFETY INSTRUCTIONS

READ THIS BEFORE USE

The following basic safety precautions should always be taken.

1.  Only the healthcare providers who have trained for this system 

should operate.

2.  Use the device only for the intended use described in this 

manual.

3.  Make sure to properly setup the system and pass the training 

test before performing any tests.

4.  Keep the equipment and its flexible cord away from hot 

surfaces.

5.  Do not use the equipment where aerosol sprays are being 

used, or where oxygen is being administered.

6.  Do not use the device if it is not working properly or damaged.
7.  Before using this product to test blood glucose, read all 

instructions thoroughly and practice the test. Do all quality 

control checks as directed.

8.  Always wear gloves when performing tests and follow your 

facility’s infection control policy and procedures.

9.  Please do not use accessories which are not specified by the 

manufacturer.

10. Users need to adhere to Standard Precautions when handling 

or using this device.  All parts of the glucose monitoring system 

should be considered potentially infectious and are capable 

of transmitting blood-borne pathogens between patients 

and healthcare professionals.  For more information, refer to 

“Guideline for Isolation Precautions: Preventing Transmission 

of Infectious Agents in Healthcare Settings 2007”, http://www.

cdc.gov/hicpac/2007ip/2007isolationprecautions.html .

Содержание POCT S10a

















































Отзывы: