FOR-A VFC-1000, Руководство по эксплуатации

Страница: 51 / 76

39
4-4-1. Playback (Forward)
This section describes how to forward playback recorded images on the camera.
To playback images, change to STOP mode then click PLAY button.
Playback starts at the currently displayed frame. You can check recorded phenomena
with moving image on the video monitor.
Playback continues until memory end is reached (or until playback range end if a
playback range has been set), after which still images are played back (STOP mode).
Click STOP button to stop playback.
Playback (frame feed) speed is set by Play Rate (the standard setting for NTSC is 30
f/s).
If Play Mode is set to NORM, video is played back once until the end of memory or until
the end of a specified playback range, after which a still image is played (STOP mode).
4-4-2. Playback (Reverse)
During reverse playback, playback is the same as forward playback, except that the
playback moves in reverse and towards memory start. Playback continues until memory
start is reached (or until playback range start if a playback range has been set), after which
still images are played back (STOP mode).
4-4-3. LOOP playback
You can set LOOP as the playback mode in order to repeatedly observe desired
phenomena. In this mode, playback continues until memory end.
Click ▼ next to ② “Play Mode”, then select one of the following from the list:
NORM (playback not repeated)
LOOP (playback repeated over the playback range)