FOR-A VFC-1000, Руководство по эксплуатации

Страница: 50 / 76

38
4-4. Playback Operations
This section describes settings related to image playback on the camera.
When recording is completed, the mode changes to STOP mode and the image at the frame
where the trigger was detected (frame T
0
, frame counter = 0) is displayed on the video monitor.
In addition, the start frame and end frame (the number is offset from the frame (T
0
)) are
displayed in
④
“Range” in the window.
Fig. 4-4-1
① Memory Select: If the segment setting is set to two or four under “Record”, select the
memory segment to be played. (If there are two segments, then “0” or
“1” can be selected. If there are four segments, then, “0”, “1”, “2”, or
“3” can be selected.)
② Play Mode: Select whether to play once (NORM) or repeatedly (LOOP).
③ Play Rate: Set the playback speed for PLAY and LOOP modes. The speed when
recording ends is 30f/s. The following settings are available for NTSC:
1, 2, 3, 5, 10, 15, 30, 60, 120, 240, 480, 960 f/s. If the setting is to
60f/s or higher, images are displayed as sampling frames.
④ Range: Set the playback range. At the time recording is completed, recording
range is the range of the memory. This setting is available for
playback frame range and the frame range for saving images to the
PC. When Memory Select is changed, the Range setting is restored
to its setting at the time that record ended.
①
②
④
③
⑤
⑥