FOR-A MV-1600, Руководство по эксплуатации

Страница: 58 / 88

2
1-3. Notes for the LAN Interface
1) IP address, Subnet mask, Gateway and Port number settings must be suitable for your
network system.
2) Consult your system administrator before setting IP address, Subnet mask, Gateway and
Port number to avoid troubles, if configuring the system in the existing LAN.
3) The MV-1600 cannot establish connection to multiple PCs over a LAN.
4) Release the port at the MV-1600 when terminating the control from the PC, so that the
MV-1600 can establish the connection again to the PC or to another PC.
5) When releasing the image data receiving port (number 2000), it takes about 10 seconds
for the port at the MV-1600 to be released. Communication cannot be established during
the period.
6) The command port (number 2001) automatically shuts down the socket connection when
it does not receive a command for 5 seconds.
7) If the security by ID and the password is set, add the data shown below to the beginning of
the command line.
Byte Parameter Command Description
1 Number of characters 1 - 8 The number of ID characters.
* ID characters
ASCII code
Alphanumeric
only
(See table 1
st
+
2
nd
next page)
ID characters: Up to 8 characters.
0 - 9 First digit
0 - 9 Second digit
0 - 9 Third digit
0 - 9 Fourth digit
* Password data
0 - 9 Fifth digit
* Total number of bytes differs depending on the set ID data.