FOR-A MV-1600, Руководство по эксплуатации

Страница: 4 / 88

[Circuitry Access]
Do not
remove any covers, panels, casing, or access circuitry while the power to
the unit is on! Turn the power off and disconnect the power cord prior to removing
any parts. Internal servicing and adjustment of the unit should be performed by
qualified personnel only.
Do not
touch any parts or circuitry with a high heat factor.
Capacitors can retain enough electric charge to cause a mild to serious shock even
after the power is disconnected. Capacitors associated with the power supply are
especially hazardous. Avoid contact with any capacitors.
The unit
should not
be operated or stored with the cover, panels, or casing
removed. Operating the unit with the circuitry exposed could result in electric shock,
fire, or a malfunction.
[Potential Hazards]
If the unit emits any abnormal smells or noises, immediately turn the power off and
disconnect the power cord to avoid a potentially hazardous situation. If this problem
occurs, contact your authorized service representative
before
attempting to operate
the unit again.
[Consumables]
The consumables used in unit must be replaced periodically. For further details on
which parts are consumables and when they should be replaced, refer to the
specifications at the end of the Operation Manual. Since the service life of the
consumables varies greatly depending on the environment in which they are used,
they should be replaced at an early date. For details on replacing the consumables,
contact your dealer.
[Rubber Feet]
If this product includes rubber feet attached by screws, when the rubber feet and
screws are removed, do not reinsert the screws without the rubber feet. Doing so
could cause damage to the internal circuits or components of the unit. Also, when
reinstalling the rubber feet to the unit, use only the supplied rubber feet and screws.
Caution
Caution
Hazard
Stop
Caution