FOR-A MV-1600, Руководство по эксплуатации

Страница: 13 / 88

5
2-2. Rear Panel
(1) VIDEO IN 1 - 16
The top connectors are used to input video signals. To loop through the signals to other
devices, connect to the bottom connectors. The bottom connectors are automatically
terminated when not connected.
(2) VIDEO OUT 1/2
Each connector is used to output an analog composite signal to a monitor. The full or split
screen display can be selected by the button on the front panel or by the control from external
device.
(3) VGA OUT
Used for analog RGB monitor output connection. Connect SXGA (1280 x 1024 pixel 60 Hz)
monitor.
IMPORTANT
To use SXGA output, select SXGA or SXGA & NETWORK in the FUNCTION menu.
See section 5-7. "SYSTEM (System Settings)" for details.
(4) REMOTE/ALARM
Used for either the external control connection (remote unit or RS-232C interface) or the
alarm input connection.
(5) LAN （ 10/100BASE-T ）
LAN interface (Ethernet) used for remote control by computer. This can be also used for
video output to the computer over a LAN interface.
IMPORTANT
To output video to a computer, select NETWORK or SXGA & NETWORK in the
FUNCTION menu. See section 5-7. "SYSTEM (System Settings)" for details.
(6) Ground Terminal
Used to ground the unit to protect operators against static electricity and electrical shock.
(7) AC IN (100-240V AC 50/60Hz
）
Used for connecting to an AC power source using the supplied accessory cord.
VIDEO IN VIDEO OUT
REMOTE/ALARM
VGA OUT
(10/100BA SE -T)
LAN
OUT
T HRU
IN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
75 A UTO
S /
N
O
.
A
C
–1
0
0
–2
4
0
V
5
0
/
6
0H
z
I
N
(4)
(1) (2) (3)
(2)
(5) (6) (7)