31
Operation Items
Item
Operation Description
(1) IP ADDRESS
Set an IP address for the MV-1600.
Be sure to make the setting when using over a LAN interface.
Please consult with your system administrator if using in your
existing network.
Set between "0.0.0.0" - "255.255.255.255"
However, it cannot be set to "0.0.0.0" or "1.0.0.0".
(2) MASK LENGTH
Set a subnet mask for the MV-1600.
Set between "0" - "31"
(3) MULTICAST
ADDRESS
Set a Multicast address to operate in the multicast mode.
The setting rage is 224.0.0.0 to 239.255.255.255 except from
224.0.0.0 to 224.0.0.255.
*This setting is not necessary if operating in the unicast mode.
(4) MULTICAST
PORT
Set a Multicast port to operate in the multicast mode.
The setting range is 1024 to 65535.
*This setting is not necessary if operating in the unicast mode.
(5) GATEWAY
If your using network does not have a gateway, this setting is not
required.
Set between "0.0.0.0" - "255.255.255.255"
(6) MAC ADDRESS
Display the MAC address value that is set for the device.
This setting cannot be changed.
IMPORTANT
The LAN interface settings except MULTICAST ADDRESS and MULTICAST PORT
are applied when the power to the MV-1600 is turned on. If those settings are
changed, be sure to turn off the MV-1600 and then turn it on again to apply the
settings.
Содержание MV-1600
