FOR-A MV-1600, Руководство по эксплуатации

Страница: 57 / 88

1
1. Communication Standards
1-1. RS-232C Interface Communication Standards
The communication standard for serial control over a RS-232C interface is shown below.
Bit rate 9,600bps
Data length 8 bit
Stop bit 1 bit
Parity None
X parameter (flow control) None
For the details of the RS-232C interface connector and cable, refer to section 6-5. “RS-232C
Interface” in the MV-1600 Operation Manual
1-2. LAN Interface Communication Standard
The communication standard for serial controller over a LAN interface is shown below.
Item Description
Compatible
communication
protocol
Data link layer: CSMA/CD
Network layer: IP, ICMP, ARP, RARP
Transport layer: TCP, UDP
Application layer: socket
IP address
Set range: “0.0.0.0” to “255.255.255.255” (except “0.0.0.0” and
“1.0.0.0”)
* Set from MENU screen of main unit.
* The initial setting is “192.168.0.1”.
Subnet mask
(Mask length)
Set range: 0 - 31
* Set from MENU screen of main unit.
* The initial setting is “24”.
Multicast address
Set range: “224.0.0.0” to “239.255.255.255” (except "224.0.0.0" to
"224.0.0.255")
* Set from MENU screen of main unit, or by web browser or the
LAN command.
* The initial setting is "239.255.0.0".
Multicast port
Set range: 1024 - 65535
* Set from MENU screen of main unit, or by web browser or the
LAN command.
* The initial setting is "2100".
Gateway
Set range: “0.0.0.0” to “255.255.255.255”
* Set from MENU screen of main unit.
* “0.0.0.0” means that gateway is not set.
* The initial setting is “0.0.0.0”.
Port
2000: For receiving image data in video transmission over a LAN.
2001: For sending and receiving commands.
MAC address
Set at the factory (cannot change).
* The contents can be seen on the MENU screen of the main unit.
Refer to section 5-6. “LAN (LAN Settings)” in the MV-1600 Operation Manual for the details of
setting on the main unit menu screen.