FOLSOM ScreenPro SPR-2000 Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 83

background image

Manual # 26-0002901-00 / Revision H ScreenPro - High Resolution Seamless Switcher

65

1) Plug the DB-25 male connector into the port labeled "Remote" on the back of
   the Screen Pro unit.

2) Make sure the other end of the cable is attached to the available COM port on the
   back of the computer performing the upgrade.

3) In the loader program, click on the Configuration Menu and select RS232 Setup.

4) In the RS232 Config->COM Port window, select the COM port the Screen Pro is attached
  to by selecting the COM#.

5) The ScreenPro defaults to a baud rate of 38.4K. The Baud Rate field (next to the
   communication lights) should reflect this.

Verifying Communications between the Computer and Screen Pro Unit

1) In the loader program, click inside the Terminal Window.

2) A blinking cursor should appear in the upper left hand corner of the window.

3) Turn the Screen Pro unit ON and wait for it to boot.

4) Back at the Terminal window, the CTS and DCD status lights should be RED.
Pressing the enter key a couple of times will allow the system prompt "#" to
be displayed on the screen.

5) If the CTS and DCD status lights are GREEN then check the communication settings in the
loader and verify the COM port is correct and the communication parameters match with what
is displayed in the CONFIG SERIAL menu on the Screen Pro unit.

6) If any of the communication parameters are changed within the loader, it is recommended
that the Screen Pro unit be powered down and the verification process started over.

Uploading Files to the Screen Pro Unit

1) Once communications have been established and verified, click on the "Open script file
  to read and upload" button to open the file browse window.

2) Select the ldr_pro.sld file and click open. At this point the loader will start to transfer
  the files to the ScreenPro system.

3) After several minutes, the loader utility will inform the user that the process is complete
down at the bottom the loader window.

4) Once this is done, you must power down the Screen Pro unit and turn it back on for
  the software to take effect. You can also close the loader utility at this time.

5) Verify the new software is in the system by looking for the version number in the
  TECH SUPPORT menu.

6) Once you have verified the version number, it is recommended that a factory reset be
performed by pressing the PROG, DEL and SEL keys together and releasing.

«
...
75
76
77
78
79
...
»

Содержание ScreenPro SPR-2000




















































































Отзывы:

Нет отзывов

Похожие инструкции для ScreenPro SPR-2000

Бренд: 3Com Страницы: 8

PathBuilder S200 Series

Бренд: 3Com Страницы: 11

Бренд: 3Com Страницы: 8

CoreBuilder 3500

Бренд: 3Com Страницы: 96

Бренд: Campbell Страницы: 14

Бренд: IDEC Страницы: 5

Бренд: IDEC Страницы: 7

Бренд: Magnetrol Страницы: 12

Бренд: Magnimage Страницы: 53

Бренд: Vector Страницы: 3

Бренд: Cablematic Страницы: 8

CN8000 KVM on the NET

Бренд: ATEN Страницы: 2

Бренд: Lantech Страницы: 118

TEG-S50TXE SHEETS

Бренд: TRENDnet Страницы: 20

VIGILANT VTS0400

Бренд: RONK Страницы: 32

Бренд: Cumberland Страницы: 2

AVS-OCT-3264-360

Бренд: AMX Страницы: 1

Бренд: MicroNet Страницы: 123

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды