Manual # 26-0002901-00 / Revision H ScreenPro - High Resolution Seamless Switcher
28
PIP H Size / PIP V Size
To control the Horizontal or Vertical Size of the PIP, select the PIP H SIZE or PIP V SIZE menu item and then turn
the Adjust control to the size desired, between 1% and 100%. Please make note of the following when adjusting the
Horizontal or Vertical size.
The scaler is limited to a maximum 2:1 compression. Therefore, the size of a full PIP (“full” meaning the entire
input image is displayed in the PIP) is limited by the following equations:
Min Horizontal Size (% of output image) = InputHSamples/(2 * OutputHRes) * 100
Min Vertical Size (% of output image) = InputVActive/(2 * OutputVRes) * 100
Note: InputHSamples may not be the same as input horizontal resolution due to oversampling.
Example:
PIP source is standard video 710x485.
Output is XGA 1024x768.
Min Horizontal Size (%) = 710/(2 * 1024) * 100 = 34.67%
Min Vertical Size (%) = 485/(2 * 768) * 100 = 31.58%
PIP sizes smaller than the calculated limits can still be used. However the right and bottom edges of the screen
will be cropped.
PIP X POS / PIP Y POS
To control the Horizontal or Vertical Position of the PIP, select PIP X POS or PIP Y POS menu item and then turn the
Adjust control to position desired, between 0% and 100%.
File Menu
The File Menu allows the user to assign one of up to 64 input configuration files to each of the eight input sources.
The input configuration file number and file name associated with each of the eight inputs are show in the menu as
illustrated below.
IN1 – IN8
To assign an input configuration file to a source, simply scroll down to the desired input source and press Select to
select the menu item. Use the Adjust knob to select the desired input configuration file and then press Select again
to complete the file association.
FILE MENU
IN 1 1 DVD1
IN 2 2 DVD2
IN 3 3 COMP1
IN 4 4 COMP2
IN 5 5 BETA1
IN 6 6 BETA2
IN 7 7 YUV1
IN 8 8 EMPTY
DELETE A FILE >>
