Foerster TAK5-CH1-25, Инструкция по эксплуатации

Страница: 96 / 226

96 Transmitter and animal management
5. Check whether the desired transmitter number has been tak-
en over and press in accept? to implement the change.
7.1.4.2 Changing the animal number
By analogy with the transmitter number, in the above menu you
can also change the animal number.
1. > animal management > transmitter > change
2. Select the animal number to be changed.
3. In animal no. change the animal number which is currently al-
located to the transmitter and confirm with . Now the
change is implemented.
7.1.4.3 Deleting the transmitter numbers
1. > animal management > transmitter > change
2. Select the transmitter number to be deleted and confirm de-
lete with .
7.1.5 Deleting the transmitter numbers of animals being canceled
As a rule, the collars (or eartags) and the corresponding trans-
mitters remain on the farm and are reused after the animal has
been canceled and has left the barn. Therefore, the transmitter
number of a canceled animal is not deleted as a standard. If,
however, the transmitter of an animal shall not be reused but
rather remain on the animal (electronic ear tag), carry out the fol-
lowing setting:
1. > animal management > cancel > settings
2. In the line delete no. select the option yes. By doing so, when
the animal is canceled the transmitter number is automatically
deleted together with the animal number. This is to prevent
< 982/A>
no.: [ 17494400]
animal no.: 982
state: registered
...
< 982/A>
no.: 234567
animal no.: 982
state: available
read in?
delete?
Note : You can only change the transmitter numbers of
non-registered animals (=state: available).
settings
delete no.: [no]