Foerster TAK5-CH1-25, Инструкция по эксплуатации

Страница: 66 / 226

66 Setup
Address
The IFS-compact unit is integrated into the CAN-bus-system.
Therefore it requires an address for clear identification purposes.
Search?
To facilitate data transfer between the automatic feeder and the
IFS-compact unit, the selected CAN-bus address must be trans-
ferred to the IFS-compact unit.
1. Activate the search mode at the IFS-compact unit. To do so,
briefly push the red, round search button on the mother-
board of the IFS-compact unit. The green LED (H4) flashes
(10 times per second).
2. In search? press .
3. If the quadruple IFS-unit is detected on the CAN-bus, the ad-
dress will be transferred. The message on the right is dis-
played. The green LED (H4) on the motherboard of the IFS-
compact unit stops flashing.
<IFS-F quadruple 1>
pump 1: [station 1]
pump 2: [station 2]
pump 3: [station 3]
pump 4: [station 4]
address: 63
search?
Note: Within a CAN-bus system an address can be allocat-
ed only once. The default addresses are the following:
Quadruple IFS-compact unit 1 = address 61,
Quadruple IFS-compact unit 2 = address 62.
address
already allocated!
Note: If you select an address that has already been allo-
cated, the message on the right will be displayed.
Note: The IFS-compact unit has one unique CAN-address
but it provides 4 stations. The individual controls of the
compact unit are designated as IFS4 1/1, IFS4 1/2,
IFS4 1/3 and IFS4 1/4 (first compact unit) resp. IFS4 2/1,
IFS4 2/2, IFS4 2/3 and IFS4 2/4 (second compact unit).
IFS-F quadruple
is being searched!
IFS-F quadruple
found!