Operating Manual EMGZ 321.EIP
19.10.2017
27
9.
Press
to store Gain A1.
10.
The display will show
11.
Select with key sensor B and repeat step 3 and 9 to do perform the gain
calculation in channel B.
12.
If you like to store a second gain factor set (e.g. for a different force measuring
roller or for another wrap angle), select with key “Gain A2” and repeat the
procedure above.
13.
Press the
key to return to the Operation State.
Fig. 19: State diagram calibration procedure
E321008e
1) The display shows the unit of measure that was previously selected
3) Permanent key pressing expedites the changing speed of the value.
Calibra.
Complet
Adjust
Gain A1
