Operating Manual EMGZ 321.EIP
19.10.2017
14
4
Configuring the System
The amplifier EMGZ321._.EIP can be configured over the operation panel (chapter
8), over a PC (web interface, chapter 9) or over EtherNet/IP. The basic configuration
is performed over the operation panel.
4.1
Description of the Operating Panel
Fig. 7: View of the Operating Panel EMGZ321.W.EIP
E321005
The keys on the operating panel have the following functions:
Key
Key function during operation
Enter Offset Compensation Procedure
Enter Calibration Procedure
To enter the Parameter Setting Mode, press the key for longer
than 3 sec. The LED will light and the first parameter group will
appear on the LCD display indicating that you entered the mode.
The State Diagrams (Fig. 20 to 25) in paragraph 8 “Parameter
Setting over the Front Panel” will help you to navigate in the
parameter setting mode.
Enter
Changes the parameter selection.
Increases the parameter values. Pressing the button increases
continuously the parameter value.
Decreases the parameter values. Pressing the button reduces
continuously the parameter value.
Fig. 8: Functions of the operation panel keys
