Operating Manual Web Guide Controller BKS309
23.07.2019
31
description
Parameter LCD
Unit
Min
Max
Selection
Factory
Drive
Direction
DriveDir
-
-
- Standard
Invers
Standard
Actuator
type
winderGL
-
-
- BKS.D.3.125
BKS.D.3.200
BKS.D.3.300
BKS.D.4.125
BKS.D.4.200
BKS.D.4.300
BKS.D.6.200
BKS.D.6.300
BKS.D.7.200
6)
BKS.D.7.300
6)
4)
Accele-
ration
Accelera ms 40 5'000 6)
80
Table 8: System parameters
-
Permanent pressing of the buttons expedites the changing speed.
-
2) The display shows the unit of measure that was previously selected.
-
3) Parameter only used in FMS-winderGLIDE series of the sizes BKS.D.3, BKS.D.4
und BKS.D.7. If you are using an actuator of the FMS-winderGLIDE series BKS.D.4
you have to use the system parameters similar to the BKS.D.3
-
4) The default value is dependent on the actuator used
-
5) System parameters are not reset, if the default function is used
-
6) only in combination with BKS309.R.DC oder BKS309.W.DC
8.6
Description of system parameters
Modification of system parameters
System parameters are factory preset and should not be modified
without contacting the service department of FMS. An
unauthorized change can cause malfunctions in the system or
damage in the machine.
