Operating Manual Web Guide Controller BKS309
23.07.2019
28
Purpose:
The controller stops guiding. Afterwards the motor drive moves to the
center.
Home Position [Home Pos]
Purpose:
This parameter determines the position of the actuator spindle in its
retracted position. An actuator stops at this position and moves no
further backwards.
Range:
0.0 to
300.0
Default: 0.0
Increment:
0.1
Unit:
[mm]
Condition:
This parameter appears on the display only if an actuator /
winderGLIDE is connected to the controller.
Middle Position [Mid Pos]
Purpose: The
[Mid Pos] parameter determines the center position of the
actuator spindle. An actuator stops at this position, if you press the
center key
. In Automatic Operation this parameter has no
meaning.
Range:
0.0 to
300.0
Default: 62.5
4)
Increment:
0.1
Unit:
[mm]
4)
The default value is dependent on the used actuator
Condition:
This parameter appears on the display only if an actuator /
winderGLIDE is connected to the controller.
Maximal Position [Max Pos]
Purpose:
This parameter determines the limit for the extended position. An
actuator stops at this position and moves no further forward.
Range:
0.0 to
300.0
Default: 125.0
4)
Increment:
0.1
Unit:
[mm]
4)
The default value is dependent on the used actuator
Condition:
This parameter appears on the display only, if an actuator /
winderGLIDE is connected to the controller.
