Operating Manual Web Guide Controller BKS309
23.07.2019
27
Setting:
[Imperial]
Purpose: If
[Imperial]
is chosen, the controller shows all data in imperial units.
Gain Setting [Gain]
Purpose:
This parameter defines the gain of the feedback value.
Range:
0.02 to
2.00
Default: 0.20
Increment:
0.01
Unit:
[ - ]
Adjusting Correction Speed [AdjSpeed]
Purpose:
This parameter determines the maximum used speed.
Range:
1
to
100
Default: 100
Increment:
1
Unit:
[%]
Power Modes [Power ON]
Purpose:
This parameter determines the operation mode after power on.
The user can choose between three behaviours.
Setting:
[Manual]
Purpose:
The controller goes to Manual Operation Mode after power on.
Setting:
Automatic [Auto]
Purpose:
The controller goes to Automatic Operation Mode after power on.
Setting:
Last Setting Used [Last Set]
Purpose:
The controller restores the operation mode that was previously
chosen before power off.
Behaviour when leaving Automatic Mode [Auto
→
Man]
Purpose:
This parameter determines the behaviour of the controller leaving the
automatic mode.
The user can choose between two behaviors.
Setting:
[Manual]
Purpose:
The controller stops guiding. The motor drive is locked at the current
position (Manual Mode).
Setting:
[Centre]
