Operating Manual Web Guide Controller BKS309
23.07.2019
7
4
Quick Installation Guide
The set-up of the BKS309 web guide controller and corresponding web guide is limited
to only mounting the devices on the machine frame, wiring and powering up system.
4.1
Configuration
-
Read the operating manual of your web guide or actuator system.
-
Check your system requirements such as:
o
Desired guiding form (edge, centre or line guiding)
o
Unit system (metric, imperial)
o
Relay or digital input requirements of your set-up
-
Draw the wiring diagram for your configuration
-
Mount and adjust your material sensor(s) to the steering frame (see p. 8ff)
-
Mount the steering frame or actuator to the machine
-
Wire the sensor(s) to the electronic unit (see p. 12ff)
-
Wire the steering frame to the electronic unit (see p. 11ff)
-
Mount the electronic unit on a place where it can be easily reached by the operator
-
Install 24VDC (18 to 30VDC)
-
If required, determine special parameters (see p. 19ff)
