www.fmiproducts.com
125077-01D
21
REPLACING BATTERIES IN HAND-
HELD REMOTE CONTROL AND AC
BATTERY BACKUP
Replacing Batteries in AC Battery
Backup
1. Remove bottom access door.
2. Remove battery pack from metal hous
-
ing.
3. Remove existing batteries. Install 4 AA
batteries into battery pack following posi
-
tive and negative directions.
4. Insert battery pack back into metal hous
-
ing.
5. Replace bottom access door.
Installing Batteries in Remote Control
Unit
1. Remove battery cover on back of remote
control unit.
2. Remove battery.
3. Install 1 A23/12V battery following positive
and negative directions.
4. Replace battery cover onto remote control unit.
FIREPLACE INSTALLATION
Continued
Figure 29 - Installing Lava Rock
Figure 30 - Installing Ember Flakes
Figure 31 - Installing Scrap Log Pieces
Lava
Rock
Ember
Flakes
Scrap Log Pieces
3. Place ember flakes around front and sides
of burner and on burner ports (see Figure
30). This will create the glowing ember ap
-
pearance as the flame touches the ember
flakes. Do not block burner ports or pilot
ports by overlapping ember flakes in one
area. It is not necessary to use all ember
material provided.
4. Place scrap log pieces randomly as shown
in Figure 31 on lava rock and around (but
not on) burner ports.
OPERATION
FOR YOUR SAFETY
READ BEFORE LIGHTING
WARNING: If you do not fol-
low these instructions exactly,
a fire or explosion may result
causing property damage, per
-
sonal injury or loss of life.
A. This appliance is equipped with an igni
-
tion device which automatically lights
the pilot. Do not light pilot by hand.
B. BEFORE LIGHTING smell all around
the appliance area for gas. Be sure to
smell next to the floor because some
gas is heavier than air and will settle
on the floor.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do
not use any phone in your building.
• Immediately call your gas supplier
from a neighbor's phone. Follow the
gas supplier's instructions.
