www.fmiproducts.com
125077-01D
19
Installing Outer Door (Cool Touch Glass
Models ending in -CC Only)
1. Remove outer door from packaging.
2. There are three spring loaded pins on
outer door. Set pins to the locked position
(see Figure 26).
3. Position outer door so pins line up with
mating hinges on fireplace. Holding door
in place, release locks on spring loaded
pins (see Figure 26).
Removing and Installing Cool Touch
Glass (Models ending in -CC Only)
Cool touch glass is factory installed.
1. Open outer door. Secure door in open
position to avoid accidental breakage.
2. Remove middle door by lifting from
hinges (see Figure 26). Set aside to avoid
scratches or damage.
FIREPLACE INSTALLATION
Continued
3. Follow these instructions in reverse to
reinstall.
Removing and Installing Inner Door (All
Models)
1. Remove screen and rod (see Figure 27,
page 20).
2. Remove side bricks from top to bottom
(see Figure 27, page 20).
3. Remove bottom bricks, starting with
middle section (see Figure 27, page 20).
4. While holding inner door, release 6
latches, 3 top and 3 bottom (see Figure
28, page 20).
5. Slowly tilt open glass at a 30° angle and lift
up to release glass from bottom retainer
(see Figure 28, page 20).
6. Follow these instructions in reverse to
reinstall.
LOCK
UNLOCK
Figure 26 - Removing/Installing Middle Door
Spring
Loaded Pin
Hook Located
on Inner Door
Pin Located on
Middle Door
Hinge
Middle
Door
Inner
Door
Outer
Door
