www.fmiproducts.com
125205-01E
19
INSTALLATION
Continued
INSTALLING LOGS, LAVA ROCK
AND GLOWING EMBERS
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use
logs supplied with fireplace.
Open louvers, remove screen, unlock door
latches, and open glass door. See
Removing
Glass Panel
, steps 1 to 3, page 18. Install
logs according to instructions for fireplace
model numbers.
1. Find and place log #1 (rear log) on top of
grate. Make sure notches in bottom of log
fit over grate (see Figure 29).
Figure 29 - Installing Log No. 1
Figure 30 - Installing Log No. 2
3. Place log #3 (crossover log) onto rear and
front logs. Make sure it is seated properly
on surface of rear log and pin on front log
as shown in Figure 31.
2. Rest log #2 (front log) on pins on front part
of grate (see Figure 30).
Figure 31 - Installing Log No. 3
Figure 32 - Installing Log No. 4
5. Place log #5 (base log) onto front left part of
grate making sure notch and hole fit over
metal pin and prong of grate. See Figure 33.
6. Place log #6 (left log) onto rear log landing
and resting it on top of front log. See Figure
33.
Figure 33 - Installing Logs No. 5 and No. 6
1
2
3
4
Metal
Pins
Metal
Pin
Rear Log
Front Log
Crossover
Log
Log
Landing
Front
Log
Log
Notches
Grate
Assembly
5
6
Metal
Pin
Grate
Prong
Rear Log
Landing
4. Place log #4 (right log) onto log landing on
right side of front log as shown in Figure 32.
