0
4. All lines which end up at the pin, should have the same tension,i.e. they should have the same
length. If this is not the case, adjust the B and C line so that all lines are equally long.
It’s useful to mark the position of
plastic ball before with a pin,
so you can always restore the
beginning position, and see
exactly, how much you moved the
ball. The adjustment of the B and C
line works as follows:
Move the position of the plastic
ball by loosening the line which is
guided through the ball.
Depending on whether the lines
should become shorter or larger,
move the ball into the wanted
direction and tighten it again.
