1
After releasing the Depowerloop Quick Release the bar slides a few meters upwards up to a
certain passage.
To relaunch the kite climb hand over hand along the FULL-DEPOWER-SAFETYLINE to the bar
and reassemble the depowerloop.
Simultaneously, keep the FDS pulled to avoid the kite from taking off. Make sure the loose
section of the FDS does not get tangled (e.g. body parts, harnesss, etc.)!
Afterwards hook the depowerloop into the harness and carefully release the FDS.
Now the kite folds up its normal shape and can be relaunched.
The bar can be unwinded af-
ter rotations. Nevertheless,
as a result of a high number
of rotations the FULL-DE-
POWER-SAFETYLINE winds
around the front lines into
the same direction (like the
current five-line-systems of
the inflatable kites).
If the lines are extremely tangled up, the Safety function might be restricted!
Therefore the Full-Depower SAFETY-LEASH as well as the front lines should not be tangled up.
If this should happen, you can untangle the trimmer and the depowerloop by unwinding them.
Make sure the Leash is never tangled while riding.
Additionallly, the Leash must not be wrapped around the center line or even the bar, as the
Safety-System might not function any more. Therefore, while riding you should keep an eye
on the Leash and unwind it if necessary.Furthermore it is likely that the rest pull of the FDS
is higher than usual, if the kite turns over or gets tangled in the lines.
