Website
7
3.2.3 Stick/Knob/Button/Trim
The PL18 EV has 2 sticks (Left stick and right stick), 6 switches (SWB, SWD, SWE, SWF, SWG and SWH) , 7 knobs (VRA to
VRG), 2 Self-locking buttons (SWA and SWC), 4 buttons (SWL、SWI、SWJ、SWK) and 8 trims ( TR1 toTR8).
Stick
s
:
Output different value when it is in different position, they can output continuous signal. And they can be
used as function controls.
Switch
es: There are two-position switches and three-position switches. Different value is corresponding to different
position. They can be used as function controls, as well as switches to turn on/off the function.
Knob
s
:
The knobs can implement the same function as sticks. Part of them can be used as trim controls
.
Button
s
:
The buttons can implement the same function as switches.
Trims
: Output different value when toggling up/down. They can be used as function controls, refer to the chapter about
Trim for detailed.
3.2.4 Adjustment of Stick Assembly
Multiplex Stick Assembly Front View
Stick
Used to adjust the screws on the back of the transmitter, gimbal stick can be either self-centering or non self-
centering, as well as changing stick tension/friction.
states: gradual light, flashing, and solid on.
When the screen is on:
• If RF is enabled without connecting the receiver (one-way binding with the receiver), the blue indicator is solid on.
• If RF is disabled, the yellow indicator is solid on.
• If the receiver is connected in two-way, the green indicator is solid on.
When the screen is off:
1. If RF is enabled without connecting the receiver (one-way binding with the receiver), the gradual light can change
to cyan, magenta, and yellow.
2. If RF is disabled, the gradual light is yellow.
3. If the receiver is connected in two-way, the gradual indicator can change to red, green, and blue.
• The LED is flashing fast in green, indicating that the binding is in progress.
• The LED is flashing in red, indicating that there is an alarm.
• The LED is blues: The transmitter is powered on until it starts successfully.
• In case of power-off: The current color is not changed until the transmitter is shut down successfully and the
LED is off.
①
②
③
④
⑤
⑥
⑦
⑧
