Website
40
pressure by 60% from each pulse in real-time when braking
is triggered.
Function Settings:
Function Settings:
Function Settings:
Function Settings:
1. Tap
Return.
2. Click + / - to change to an appropriate value.
1. Tap
Delay.
2. Click + / - to change to an appropriate value.
1. Tap
Cycle.
2. Click + / - to change to an appropriate value.
1. Tap
Point.
2. Click + / - to change to an appropriate value.
Delay
Cycle
Point
To set the time from trigger the pulse brake to actually
pulse brake between 0% to 100%. The default value is 0%.
The higher the value, the slower the pluse brake function
will take effect. When the value is set to 0%, there is no
delay, i.e. the pulse brake function takes effect
immediately when the brake is triggered. When the value is
set to 100%, the delay is 2S.
It is used to set the interval between pulses. The setting
range is 20% to 100%. The default value is 50%. The larger
the value, the longer the interval time between pulses. The
value 100% indicates the interval is 0.5S.
It is used to set the start position of pulse brake function.
The setting range is 20% to 100%. The default value is
30%. The higher the value, the closer the stick position
that triggers the pulse brake function is to the full
brake position. 0%-100% is the entire travel movement
amount of the throttle trigger..
