Website
43
Switch
Gate(Logic switch)
Switch 1 Switch 2
AND
OR
XOR
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
ON
ON
OFF
OFF
ON
ON
ON
ON
ON
ON
OFF
Function Settings:
1. Enter
Logic switches
menu
.
2. Tap a logic switch to enter.
3. Tap the top
Select Sw.
to enter, then select a switch and
position, click to return.
4. Tap the down
Select Sw.
to enter, then select a switch and
position, click to return.
5. Click
AND
,
OR
, or
XOR
according to the following table.
6. Toggle the switches to make sure everything is working as
expected.
7.20 Logic Switches
This function changes the output curve for the throttle channel. A curve can be created using 3 – 11 different points
so that the user has much better control of the model's engine. The setting is for current condition, for the settings
of other conditions, switch to other conditions first, and then carry out the settings.
AND If switch 1 and switch 2 are active, then the logic
switch will be on. If either switch 1 or switch 2 is off, or
switch 1 and switch 2 are both off, the logic switch is off.
OR If either switch 1 or switch 2 is active, or switch 1 and
switch 2 are both on, then the logic switch will be on. If
switch 1 and switch 2 are both off, the logic switch will be
off.
XOR If either switch 1 or switch 2 is active, then the logic
switch will be on, but if switch 1 and switch 2 are both
active or off, the logic switch will be off.
Refer to the table below for more information on logic
gates and their function.
The statues of the two switches
and the logic switch.