Website
12
The binding interface of enhanced receiver:
The binding interface of multiple receivers:
To bind with enhance version
receiver and provides 18 channels
with moderate communication
distance.
To bind with enhance version
receiver and provides 12 channels
with super anti-interference and
moderate communication distance.
To bind with enhance version
receiver and provides 8 channels, fast
communication within short distance.
To set the starting channel, namely
to increase the value.
To set the starting channel, namely
to decrease the value.
To set S-Tele, the
√
appears,
indicating that the transmitter is in
S-Tele mode.
To set multi-RX. the
√
appears,
indicating that the transmitter is in
the multiple receivers mode.
To set the starting channel of the
secondary receiver.
To set the starting channel of
the primary receiver.
To bind the transmitter with the
secondary receiver. Click it to put the
transmitter into bind mode.
To bind the transmitter with the
primary receiver. Click it to put
the transmitter into bind mode.
Function Settings:
1. Tap
, then select
Bind setting
via
RX SETUP
.
2. Tap
Bind setting
to enter the binding setting interface. Then set
some items, such as selecting suitable RF System, choosing two
way or not, multiple receiver or
S-Tele
, setting the starting channel.
Afterwards, click
Bind
to put the transmitter into bind mode.
3. Put the receiver into bind mode.
4. The LED of the receiver stops flashing and is solid on, indicating that
the binding process is finished.
5. Check to make sure the transmitter and the receiver are working
correctly, repeat steps 1 to 3 (binding process) if any problems arise.
Notes:
1. The receiver may vary with different models, visit FLYSKY official website
for more details.
2. When you select
Routine 18ch
, with choosing
Two way
connection and
Mul RX
(Multi-receiver), the transmitter supports multi-receiver mode. In
this mode, to ensure the accuracy of the data returned from the primary
receiver, bind the primary receiver only.
• The secondary receiver can bind with multiple receivers. In binding
of multiple secondary receivers, the receiver does not return
information like one way connection.
• If
S-Tele
(Secondary Telemetry) is selected, only one secondary
receiver is supported; the secondary receiver only returns its own
information.
