FLYGT C/R3231 Скачать руководство пользователя

Страница: 1 / 172

Xylem Water Solutions AB (the Company) was previously named ITT Water &

Wastewater AB. The name change took place in November 2011. This is document is

(i) a document that relates to a product of the Company phased out prior to the name

change; or (ii) an old version of documentation relating to a product that is still being

produced by the Company but which document was published prior to the 1st of

January 2012 . This document may therefore still be marked "ITT". Xylem Water

Solutions AB is no longer an ITT company and the fact that "ITT" may appear on this

document shall not be interpreted as a reference by the Company to "ITT" in the

Company's current business activities. Any use or reference to “ITT” by you is strictly

prohibited. In no event will we be liable for any incidental, indirect, consequential,

punitive or special damages of any kind, or any other damages whatsoever, including,

without limitation, those resulting from loss of profit, loss of contracts, loss of reputation,

goodwill, data, information, income, anticipated savings or business relationships for any

use by you of “ITT”. This disclaimer notice shall be interpreted and governed by Swedish

law, and any disputes in relation to it are subject to the jurisdiction of the courts in Sweden.

If you do not agree to these terms and conditions you should not print this document and

immediately stop accessing it.

Содержание C/R3231













































































































































































Результаты поиска

Содержание C/R3231

Отзывы:

Похожие инструкции для C/R3231

Бренды по названию

Популярные бренды

FLYGT C/R3231, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание C/R3231

Отзывы:

Похожие инструкции для C/R3231

Бренды по названию

Популярные бренды