manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Руководство программиста

Поделиться
Скачать
Fluke ScopeMeter 190 Series Скачать руководство пользователя страница 91

                             Page 3.63
    =============================================================
                   REPLAY                        RP
    -------------------------------------------------------------

    Purpose:

       To select and setup the Replay analysis mode and to select
       a replay screen (see Syntax 2) or to query the total
       number of valid replay screens (see Syntax 1).

       Note: applicable for the Fluke 199 and 196 families

    Command Syntax 1:

       RP<cr>

    Command Syntax 2:

       RP <screen_index><cr>

       where,

       <screen_index> = 0 to -99   : Replay screen number
                                       0 = newest (current) screen
                                     -99 = oldest screen

    Response Syntax 1:

       <acknowledge><cr><nr_of_screens><screen_index><cr>

       where,

       <nr_of_screens> = 0 to 100    : number of valid screens
                                       0 = no valid screens

       <screen_screen> = 0 to -99    : index of the actual screen

    Response Syntax 2:

       <acknowledge><cr>

       As a result, the Replay function is started and the replay
       screen <screen_index> is shown on the instrument.

       Notes: - When <screen_index> is omitted, nothing happens.
              - Replaying screens works only in the SCOPE mode.

       Tips:  - Use the QP, QS, QM, QW commands for information
                about the replayed screen and measurements.
              - Send the AT command to return to disable the Replay
                function and return to normal (running).

    Example:

Содержание ScopeMeter 190 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды