manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Руководство программиста

Поделиться
Скачать
Fluke ScopeMeter 190 Series Скачать руководство пользователя страница 58

    PRINT #1, "PC 1200"       ’Programs ScopeMeter back to the
                              ’default baud rate.
    GOSUB Acknowledge         ’Input acknowledge from ScopeMeter.
    CLOSE #1

    PRINT "Print data copied to file ’SCREEN.PNG’."
    PRINT "You can use a browser program or a graphics editor"
    PRINT "to view this file."

    END

    ’****************** ReadBlock subroutine *********************
    ’This subroutine reads one block of data from the RS232 port.
    ’The actual data bytes received (i.e., excluding the block
    ’header, checksum and acknowledge bytes) are stored in the
    ’string BlockData$.
    ’LastBlock% indicates whether the received block is the last
    ’one (1) or not (0).

ReadBlock:
    PRINT #1, "0"       ’Request the next data block.
    GOSUB Acknowledge   ’Input acknowledge from ScopeMeter.

    BlockHeader$ = INPUT$(5, #1)  ’Read the block header.

    IF LEFT$(BlockHeader$, 2) <> "#0" THEN
        PRINT "Block transfer protocol error."
        CLOSE            ’Close all files.
        PRINT "Program aborted."
        END
    END IF

    IF (ASC(MID$(BlockHeader$, 3, 1)) AND 128) = 128 THEN
        LastBlock% = 1    ’This is the last block.
    ELSE
        LastBlock% = 0
    END IF

    BlockLenHigh% = ASC(MID$(BlockHeader$, 4, 1))
    BlockLenLow% = ASC(MID$(BlockHeader$, 5, 1))
    BlockLength& = (256 * BlockLenHigh%) + BlockLenLow%

    BlockData$ = INPUT$(BlockLength&, #1)  ’Read the block data.

    CheckSum$ = INPUT$(2, #1) ’Read the checksum
    ReceivedCheckSum% = ASC(LEFT$(CheckSum$, 1))
    CalculatedCheckSum% = 0
    FOR I& = 1 TO BlockLength&
        Byte% = ASC(MID$(BlockData$, I&, 1))
        CalculatedCheckSum% = CalculatedCheckSum% + Byte%
        CalculatedCheckSum% = CalculatedCheckSum% MOD 256
    NEXT I&
    IF CalculatedCheckSum% <> ReceivedCheckSum% THEN
       PRINT "Checksum error"
       PRINT #1, "2"    ’Terminate (abort) QP command.
                        ’(We could send "1" instead to request

Содержание ScopeMeter 190 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды