manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Руководство программиста

Поделиться
Скачать
Fluke ScopeMeter 190 Series Скачать руководство пользователя страница 5

                             Page 2.3

      ** Responses received from the ScopeMeter **

    After each command sent to the ScopeMeter there
    is an automatic response from it, indicated as <acknowledge>
    (which you MUST input), to let the computer know whether or
    not the received command has been successfully executed.
    Refer to the ’Acknowledge’ section below.

    There are several commands that ask the ScopeMeter
    for response data. Such commands are called Queries.
    Example:

    ID        This is the IDentification query, which asks for
              the model number and the software version of the
              ScopeMeter.

    When the ScopeMeter has received a query, it sends
    the <acknowledge> reply as it does after any command, but
    now it is followed by the queried response data.

    The format of the response data depends upon which query is
    sent. When a response consists of different response data
    portions, these are separated with commas (ASCII code 44).
    Also refer to the section ’Data Separators’.

    All response data, <acknowledge> as well as following
    (queried) response data are terminated with the carriage
    return code (<cr> = ASCII 13). Also refer to the section
    ’Command and Response Terminators’.

Содержание ScopeMeter 190 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды