manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Руководство программиста

Поделиться
Скачать
Fluke ScopeMeter 190 Series Скачать руководство пользователя страница 2

                             Page 1.1
    =============================================================

    1.  INSTALLING THE PM9080

    - Connect the PM9080 to the RS232 port of the computer.
      If necessary, use a 9-pin to 25-pin adapter and
      25-pin gender changer.

    - Hook the PM9080 cable to the ScopeMeter.

    - Turn on the computer and the ScopeMeter.

    - Make sure that the communication settings match for the
      RS232 port of the computer and the ScopeMeter.

      After power-on, the default settings of the ScopeMeter
      are as follows:

              1200 baud, No parity, 8 data bits, 1 stop bit

      You can modify the baud rate with the PC (Program
      Communication) command. See chapter 3 COMMAND REFERENCE.
      Other settings are fixed.

      You can modify the computer RS232 port settings to match
      the above ScopeMeter settings with the following
      DOS command:

              MODE COM1:1200,N,8,1

      This command assumes that COM1 is the RS232 port used on
      the computer. Replace COM1 in the above command with COM2,
      COM3, or COM4 if one of these ports is used. You can place
      this command in the computer startup file AUTOEXEC.BAT so
      that the default settings for the computer are the same as
      for the ScopeMeter. If you want to use a higher
      data transfer speed (baud rate), let your QBASIC program
      change the settings for both the computer and the
      ScopeMeter. See the example under the PC (Program
      Communication) command in chapter 3 COMMAND REFERENCE.

Содержание ScopeMeter 190 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды