manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Руководство программиста

Поделиться
Скачать
Fluke ScopeMeter 190 Series Скачать руководство пользователя страница 41

                             Page 3.30
    =============================================================
                   PROGRAM SETUP                 PS
    -------------------------------------------------------------

    Purpose:

       Restores a complete setup, previously saved with the SS
       (Save Setup) command and queried with the QS (Query Setup)
       command and saved in a string variable or to a file.
       <Command 1> -> <Response 1> -> <Command 2> -> <Response 2>

    Command Syntax 1:

       PS [<saved_setup_no>]<cr>

       where,

       <saved_setup_no> = 0      : Actual setup

    Response Syntax 1:

       <acknowledge><cr>

    Command Syntax 2:

       <queried_setup><cr>

       <queried_setup> =  The data returned with the QS command.
                          (omit the <acknowledge><cr> response).

    Response Syntax 2:

       <acknowledge><cr>

       Note:    Wait for at least two seconds after the
                <acknowledge> reply has been received, to let
                the ScopeMeter settle itself before you send the
                next command.

    Remarks:

       The ScopeMeter sends the <acknowledge> reply
       after it has executed the setup from the PS command.
       You must send the <setup> string as a whole, exactly as
       returned from the QS (Query Setup) command.
       If you do not follow this rule, the ScopeMeter
       may crash. A Reset may then be necessary to recover
       the ScopeMeter. (Refer to the ScopeMeter Users Manual.)

    Example:

    The following example program demonstrates the use of the
    QS (QUERY SETUP) and the PS (PROGRAM SETUP) commands.
    The present setup is queried from ScopeMeter and saved to
    file. The program asks you to change the ScopeMeter settings.
    Then the original setup is read from file and sent back

Содержание ScopeMeter 190 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды