manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Руководство программиста

Поделиться
Скачать
Fluke ScopeMeter 190 Series Скачать руководство пользователя страница 8

                             Page 2.6

              ** Command and Response Terminators **
                      (Message Terminators)

    - Command (Program Message) Terminators

      A code is needed at the end of each command to tell the
      ScopeMeter that the command is ended, and that it
      can start executing the command. This code is called the
      Program Message Terminator. The code needed for the
      ScopeMeter is carriage return (ASCII code 13 decimal).
      Notes:

       1. The carriage return code is a non-visible ASCII
          character. Therefore this code is represented as <cr>
          in the Command Syntax and Response Syntax lines given
          for each command.
       2. The QBASIC programming language, which is used for
          all program examples, automatically adds a carriage
          return to the end of the command output. (In the QBASIC
          language, this is the PRINT #....  statement.)

      After <cr> is recognized by the ScopeMeter, the
      entered command is executed. After EACH command the
      ScopeMeter returns <acknowledge><cr> to the
      computer to signal the end of the command processing (also
      see the section ’Acknowledge’.)

    - Response (Message) Terminators

      The response from the ScopeMeter ends with a
      carriage return (ASCII 13). This is indicated as <cr> in
      the Response Syntax for each command.

Содержание ScopeMeter 190 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды