Fluke ScopeMeter 190 Series III, Руководство по обслуживанию

Страница: 9 / 70

ScopeMeter® Test Tool
Performance Verification
5
Menu Navigation
During verification you must open menus and choose items from the menu.
To make choices in a menu:
1. Reset the Test Tool.
2. Open a menu, for example, press
P
and press
2
(READING …).
The menu shown in Figure 1 opens. A yellow background or yellow characters mark the
active functions. If more than one menu group is available, they are separated by a vertical
line.
3. Use the cursor keys to highlight the function.
4. Press
E
to confirm the selection.
The active function in the next menu group is highlighted. If the confirmation is made in the
last (most right) menu group, the menu will close.
Figure 1. Menu Item Selection
Standard Test Tool Setup
Before you start the verification procedure you must define a standard Test Tool setup, for
example, SCOPE 1. During verification you will be asked to recall this setup. This defines the
initial Test Tool setup for each verification.
Press
E
to confirm each setting.
Note
The setup steps for channel C and D are only for the 4-channel models.
E E E
P
4
f g
h
i
3a
3a
1
2 3b 3b 3b