DataView™ LI55 Level Controller
Quick Start
8
| P a g e
Power Connections
The external power source to DataView is connected through a two-
terminal connector labeled POWER. The DataView will operate
regardless of polarity connection. The + and - symbols are only a
suggested wiring convention.
AC or DC
POWER
Required External Fuse:
5 A max, 250 V Slow Blow
POWER
+ -
DataView Power Connection
!
Refer to the product label on the display for the
DataView's power requirements.
The LI55-1__1 series operates from 95 to 265 VDC, 5-60 Hz.
The LI55-8__1 series operates at 12 to 24 VDC.
Signal Connections
Signal connections are made to a six-terminal connector labeled
SIGNAL. The COM (common) terminal is the return for the 4-20 mA and
the
10 V input signals.
!
The 2-wire connection is the most common for Flowline
products (EchoPod, EchoSonic II, EchoSpan, EchoSafe,
Echotouch (LU20 series only), DeltaSpan and FloaTek
series).
