DataView™ LI55 Level Controller
Quick Start
19
| P a g e
Setting the Units of Operation (
units
)
The LI55 series can show level (ex. InCHES, cm, FEEt, Meter, etc) or
Volume (GAL, LItErS, etc.) or any other engineering units. Please
determine the units of operation that you want to appear on the display.
The units chosen will not only represent the displayed values, but also
the settings for the relay(s) and the repeater output.
To set units:
1. Press
the
MENU
button to enter the Main Menu. Units (unitS) will
be the first operation available.
2. Press
ENTER
button to enter Units. The current setting will appear.
3. Press
the
Up
button to scroll through the options for Units.
a. Choices include Gallons (GAL), Liters (LitEr), Inches
(IncH), Feet (FEEt), Centimeters (cm), Meters (MEtEr),
Percent (PErcnt) and Custom (CuSt).
4. When the correct unit of operation appears, press
ENTER
to save
this setting and then press
MENU
to exit.
a. For custom (CuSt), press
ENTER
to proceed to the next
screen.
b. Use
the
UP
and
RIGHT
buttons to change each character
to the desired set of alphanumeric characters.
c. See
A Note on Characters
on page 15 to review the
options for the available alphanumeric characters.
d. There are 6 segments available for the Custom setting.
e. When completed, press
ENTER
to save this setting and
then press
MENU
to exit.
