DataView™ LI55 Level Controller
Quick Start
25
| P a g e
a. Scroll through the Relays, usually 1-4, using the
Up
button. Press the
ENTER
button to select a Relay.
b. The Relay Set Point (SEt #) will appear.
4. Press
the
ENTER
button again to view the Relay Set Point (SEt #)
for the relay. The Relay Set Point sets the level where the relay will
energize by falling between the Empty and Full values. Values can
be changed by pressing the
Right
button to move the highlighted
digit to the right and the
Up
button to increase the setting’s value.
a. Press
the
ENTER
button to save this setting.
b. The Relay Reset Point (rSt #) will appear.
5. Press
the
ENTER
button again to view the Reset Point (rSt #) for
the relay. The Reset Point sets level where the relay will de-
energize by falling between the Empty and Full values. Again,
values can be changed by pressing the
Right
button to move the
highlighted digit to the right and the
Up
button to increase the
setting’s value.
a. Press
the
ENTER
button to save the setting.
b. The next relay (rLy #) in sequence will appear
6. To set another relay, press
ENTER
to continue or press
MENU
button to exit.
