DataView™ LI55 Level Controller
Quick Start
15
| P a g e
Buttons
Down the right side of the Dataview's front panel are four buttons. It is
through these buttons that you will set up and configure the DataView.
These buttons are explained as follows:
A Note on Characters
0123456789abCcdefgHhIijk
lnOopqrstuUxyz-/=()=
m
w
!
The DataView display uses a graphic system to type out each
command. While the letters "m" and "w" are not included, they can be
created by combining characters.
n
+
m
=
m
u
+
w
=
uw
Menu
Use this button to enter or exit the DataView's
configuration mode, view settings, or access advanced
features.
Right
Use this button to move to the next digit during digit or
decimal point configuration. This is also used to reset the
max/min readings or other parameter/function assigned
through the User menu.
Up
Use this button to scroll through the menus, decimal point,
or to change the value of a digit. This is also used to
display max/min readings or other parameter/function
assigned through the User menu.
Enter
Use this button to access a menu or to accept a setting.
Configuration changes are only saved after this is
pressed. This is also used to acknowledge relays or other
parameters/function assigned through the User menu.
