Flottweg TRICANTER Z 8E, Руководство по эксплуатации

Страница: 40 / 100

Flottweg
Trouble shooting 4.2/1
PROBLEM CAUSE ACTION
Too strong oscillations,
vibrations and noise One-sided solids deposit in
the bowl or in the scroll
body interior
(due to
insufficient rinsing or after long
idle times due to drying of
residual solids-bearing liquid)
1
Adapt rinsing measures
(see page 2.3)
In case of no improvement:
Disassembly and cleaning
(by authorised expert)
Scroll bearing damage Replacement
(by authorised expert)
Main bearing damage Replacement
(by authorised expert)
Scroll wear
1
Replacement or repair
(by authorised expert)
Mobility of the connection
lines is not guaranteed
(compensators)
Check and restore mobility if required
(observe mounting dimension sheet)
.
Contact of the rotor bed with
fixing bolt below rubber
hollow spring Check the length of the bolt and/or
setting height of the rubber hollow
spring and correct if required
(observe
mounting installation plan)
.
Broken feed pipe Replacement or repair
(by authorised expert)
Impeller disc damage,
contact with rotating
impeller chamber
Replacement or repair
(by authorised expert)
Broken screws at housing,
belt guard, additional
components...
Replacement or repair
(by authorised expert)
Corrosion of product
wetted parts Materials are not resistant
to the product or cleaning
agent
1
Determine and eliminate the cause
Replace corroded parts
(by authorised expert
Wear Abrasive solids portions
cause inadmissible material
removal
1
Determine and eliminate the cause
Replace or repair worn parts
(by authorised expert)
Centrifuge not clean Flushing insufficient Adapt rinsing measures
Solids tend to deposit Adapt rinsing measures
Excessive bearing
temperatures Wrong lubrication Check lubrication
(see page 3.2/1)
Defective bearing
(e.g. wear, corrosion)
Replacement
(by authorised expert)
1
Observe safety instructions Page 4.1
U
k_
4
_
2
_
1
-3
x8
-0
-4
_
2
9
0
4
0
8
-P
re
-V
i_
w
o
h