Flottweg TRICANTER Z 8E, Руководство по эксплуатации

Страница: 10 / 100

Flottweg
Safety instructions 1.2/3
Danger at the machine
Rotating parts may bruise or cut off fingers and hands.
Operate centrifuge only with properly mounted safety
covers!
The main risk at the machine is the fast rotating rotor and its drive unit.
Rotor, belt drive and motor may bruise or cut off fingers and hands.
Therefore hood and covers must not be removed before the rotor is at standstill.
As a matter of principle, before maintenance and dismounting work, make sure that the
rotor stands still and is secured against restarting.
The solids are centrifuged downwards out of the solids
housing with great power.
Danger of injury to fingers and hands.
Never put your hand into it!
Always take solids samples with suitable tool.
The solids chute has to be lead closed up to the conveyor or collecting tank.
Thereby sound emission is reduced and ejected parts (kernels, stones, etc.) are
prevented from rebounding from the floor and thus causing injuries.
With hydraulic drives oil may squirt out under high pressure
due to damages at individual components.
This may cause injuries especially to the eyes and
poisoning.
In case of contact with skin and eyes take measures as
stated in the provided safety data sheet.
During operation without product the temperature of the
centrifuge can increase inadmissibly high. Therefore the
centrifuge may be operated without product for maximum
two hours.
After two hours:
- Either switch the bowl drive off
- or reduce the bowl speed to 30%
- or flush the decanter for cooling
WARNING
DANGER
WARNING
U
k1
_
2
_
3
x8
_
2
1
0
9
1
6
–
P
re
-vi
-sc
h
l
CAUTION