FLIR Quasar Gen II Series CM-6212 H1-I, Руководство пользователя и инструкция по установке, Страница: 43 / 146

37 September 6, 2017
Configuration and Operation
CM-6212 H1-I User and Installation Guide
9 Configuration and Operation
The Quasar Gen II camera is provided with a browser-based configuration interface for video playback and
recording. In this chapter, information about main page introduction, system related settings and camera
settings are described in detail.
Additionally, if FLIR’s Latitude VMS is used, many of the configurations and features of FLIR’s VMS provide
configuration and automation of the camera.
The Settings tab in the Navigation Bar opens the sections in the sidebar that are used for configuring the
camera. Three sections are available for configuration : System , Streaming , and Camera .
Note:
The System screen is accessible only by the Administrator.
This section includes the following information:
·
Browser-Based Viewer Introduction
·
Live View
·
System Tab
·
Streaming Tab
·
Camera Tab
·
Logout
9.1 Browser-Based Viewer Introduction
The camera's web interface can be configured and operated from a 32-bit version of Internet Explorer 9 and
above.
To access the unit via the web browser
1. Open your browser.
2. Enter the unit’s IP address in the browser’s address bar.
3. Press the ENTER key on your PC keyboard. The unit’s Login window is displayed.
See Figure: Login Window .
4. Enter the user name (default: Admin ) and password (default: 1234 ) to log into the system. The
unit’s web interface opens.
Note:
The user name and password are case-sensitive.