FLIR Quasar Gen II Series CM-6212 H1-I, Руководство пользователя и инструкция по установке, Страница: 108 / 146

September 6, 2017 102
Configuration and Operation
CM-6212 H1-I User and Installation Guide
9.4.1.1.2 Video Rotate Type
You can change video display type if necessary. Selectable video rotate types include Normal video, Flip
video, Mirror video, 90 degree clock wise, 180 degree rotate, and 90 degree counterclock wise (referred to as
“90 and 270 degrees” in Latitude). Differences among these types are illustrated below. Suppose the
displayed image of the camera is shown as follows.
View-1 (Source)
To rotate the image vertically, for example, select Flip video . The displayed image is reversed as shown
below.
View-2 Image Rotated Vertically (Reversed
)
Following are descriptions of different video rotate types.
·
Normal video – The image appears as it is viewed. This is the default setting.
·
Flip video – The image is reversed along its horizontal axis.
·
Mirror video – The image is reversed along its vertical axis.
·
90 degree clock wise – The image rotates 90° clockwise (to the right) and is displayed in 9:16
aspect ratio. This mode is ideal for use when monitoring a long, narrow area, such as an aisle,
hallway or corridor.
·
180 degree rotate – The image rotates 180° counter-clockwise (to the left).
·
90 degree counterclock wise – The image rotates 90° counter-clockwise (to the left) and is
displayed in 9:16 aspect ratio. This mode is recommended when monitoring a long, narrow area,
such as an aisle, hallway or corridor. This mode is referred to in Latitude as “90 and 270 degrees”
mode.
Click SAVE to confirm the setting.