FLIR Quasar Gen II Series CM-6212 H1-I, Руководство пользователя и инструкция по установке, Страница: 65 / 146

59 September 6, 2017
Configuration and Operation
CM-6212 H1-I User and Installation Guide
SNMP v1/v2
·
Enable SNMP v1 or Enable SNMP v2 – Select the version of SNMP (v1 or v2) to use by checking
the relevant box.
·
Read Community – Specify the community name that has read-only access to all supported
SNMP objects. The default value is public.
·
Write Community – Specify the community name that has read/write access to all supported
SNMP objects (except read-only objects). The default value is private.
SNMP v3
SNMP v3 provides important security features including:
·
Confidentiality – Encryption of packets to prevent snooping by an unauthorized source .
·
Integrity – Message integrity to ensure that a packet has not been tampered with in transit
including an optional packet replay protection mechanism.
·
Authentication – To verify that the message is from a valid source.
To enable the SNMP v3 protocol, enter the appropriate data and passwords requested:
·
Enable SNMP v3 – Select the checkbox.
·
Security Name – See note below.
·
Authentication Type – Select MD5 or SHA from the drop-down list. See note below.
·
Authentication Password – See note below.
·
Encryption Type – Select DES or AES from the drop-down list. See note below.
·
Encryption Password – See note below.
Note:
You may have to consult with your System Administrator to activate this function..
Traps for SNMP v1/v2/v3
Traps are used by the camera to send messages to a management system for important events or status
changes.
·
Enable traps – Check this box to activate trap reporting.
·
Trap address – Enter the IP address of the management server.
·
Trap community – Enter the community to use when sending a trap message to the
management system. The default value is public .
·
Trap Option
·
Warm start – A warm start SNMP trap signifies that the SNMP device, such as the camera,
performs a software reload.
Click SAVE when complete.