FLIR Quasar Gen II Series CM-6212 H1-I, Руководство пользователя и инструкция по установке, Страница: 33 / 146

27 September 6, 2017
Configuring the Unit’s Initial IP Address
CM-6212 H1-I User and Installation Guide
7 Configuring the Unit’s Initial IP Address
Use the FLIR DNA utility to discover the unit on the network and to set the unit’s initial IP address.
·
If the camera is located on a network that uses a DHCP server, or is managed by FLIR’s Horizon
or Meridian VMS and is configured as a DHCP server, configure the camera with
DHCP-enabled .
Horizon or Meridian automatically assigns the camera an IP address.
·
If the camera is located on a network that does not use a DHCP server, or is managed by FLIR’s
Latitude VMS, manually enter its IP address in the DNA utility.
Note:
1. It is possible to set the IP address without changing the subnet.
2. The unit and the PC must be physically connected on the same network segment.
To manage the camera using Horizon, Meridian, or on a DHCP-enabled network
1. Insert the CD included in the package in your computer’s disk drive.
2. Run the
dna.exe
file by clicking the icon. The DNA application opens and the device is
displayed in the window.
DNA Discovery Window
3. Right-click the mouse and select the assigned IP address or click the Assign IP button to open
the DNA Assign IP dialog box.
Note:
The camera's default IP Address and the subnet mask IP Address are automatically supplied by
the DHCP server.
4. In the dialog box that is displayed, enter values for the IP Address, Gateway and Netmask.