FLIR Quasar Gen II Series CM-6212 H1-I, Руководство пользователя и инструкция по установке, Страница: 115 / 146

109 September 6, 2017
Configuration and Operation
CM-6212 H1-I User and Installation Guide
Bit Rate
Selectable audio transmission bit rate include 16 kbps (G.726), 24 kbps (G.726), 32 kbps (G.726),
40 kbps (G.726), µLAW (G.711), ALAW (G.711), and AAC. Both µLAW and ALAW signify 64 kbps, but in
different compression formats. A higher bit rate enables higher audio quality, but requires higher bandwidth.
The default setting is
AAC .
Note:
Latitude does not support G.726.
Click SAVE to confirm the settings.
Recording to Storage
This function enables recording of the audio on the SD card and NAS. The Recording to Storage function
may be enabled or disabled in the Audio screen. The default setting is Disabled.
Note:
This function works only if the Recording to Storage option has been selected or if the Schedule option
has been set.
Click SAVE to confirm the settings.
9.5 Camera Tab
From the Camera tab, the administrator can adjust any of the camera settings from the following tabs:
Exposure Picture Adjustment Advanced Picture Settings IR Function Misc.
Camera Section Tabs